Page 1 of 1

Remington "Special Field" Alternatives

Posted: Sat Apr 06, 2024 10:24 am
by NorincoKid
Have an itch for a SBS....purely for funsies.

I've been looking into the Rem "Special Field" pumps, basically an 870 but with a slightly shorter magazine tube, and a barrel lug closer to the receiver than a standard 870.l

Looks like one of those could be chopped down and get me around 10.5" or so if I go flush with the tube cap. That's a length I'm happy with.

But man, those shotguns are f*cking expensive. Anybody here know of any comparable tube lengths on other models that could get me around that magic 10"-10.5" length?

Looks like a standard 870 could go as short as 12.5" but I'm trying to for a few inches shorter than that. While I'm sure that I could shorten and rethread a mag tube, and remove and reattach a barrel lug ring myself, I'd like to avoid doing that...would much rather just wait for a stamp and go at it with the hacksaw.

Maybe some of the offbrand guns are floating around with short/low magazine tube capacity? Old Sears guns, JC Higgins, Western Field etc.

Re: Remington "Special Field" Alternatives

Posted: Sat Apr 20, 2024 10:27 pm
by Outgunu
Old Remington Wingmasters are hard to beat for smooth action and trigger if you want a pump gun.

Re: Remington "Special Field" Alternatives

Posted: Sun Apr 21, 2024 8:16 pm
by NorincoKid
Outgunu wrote: Sat Apr 20, 2024 10:27 pm Old Remington Wingmasters are hard to beat for smooth action and trigger if you want a pump gun.
Indeed.

But it's really more of a length issue than anything else. In a perfect world, it would be nice to just grab a wingmaster or police magnum and set it up like the special field but that's just not very fun at all on Remingtons...

Re: Remington "Special Field" Alternatives

Posted: Fri Jun 28, 2024 1:21 pm
by NorincoKid
Well, stumbled upon a very inexpensive Chinese copy of an 870, or at least it resembles an 870.

From the math (which I admittedly am not the best with) so far, looks like I can get it down to 8.5" and still be a 3+1 capacity gun, which would put me at 2" shorter than a special field, with the same capacity.

Still some work to do, but might make a fun, cheap little pump action blaster. Ill try to get some pics.