Page 3 of 6
Re: Official C&R Picture Thread
Posted: Sun Jun 16, 2019 3:36 pm
by hurricanecharlie
What is the definitive answer on type of wood? I have heard teak but teak is extremely heavy,dust toxic ,and must use different tools because it is so hard and I believe contains silica.Very pretty rifles.Shoot great. Friend has one I have not been able to make a trade.
Re: Official C&R Picture Thread
Posted: Wed Jun 19, 2019 12:06 pm
by NorincoKid
hurricanecharlie wrote: ↑Sun Jun 16, 2019 3:36 pm
What is the definitive answer on type of wood? I have heard teak but teak is extremely heavy,dust toxic ,and must use different tools because it is so hard and I believe contains silica.Very pretty rifles.Shoot great. Friend has one I have not been able to make a trade.
I'm not sure. I'm no wood expert. Its definitely dense, though.
As much as I really, really try to leave a milsurp gun alone, I'm really tempted to try to sand her down and get her nice and blonde like a Mitchell's
Re: Official C&R Picture Thread
Posted: Sat Jun 22, 2019 9:13 am
by hurricanecharlie
Don't do it!
That teak color is so rich.
Find a late Enfiled no4mk2
Re: Official C&R Picture Thread
Posted: Sat Aug 22, 2020 8:25 pm
by NorincoKid
Re: Official C&R Picture Thread
Posted: Wed Sep 23, 2020 1:13 pm
by NorincoKid
Re: Official C&R Picture Thread
Posted: Sun Jan 23, 2022 1:52 pm
by NorincoKid
Re: Official C&R Picture Thread
Posted: Sun Jan 23, 2022 3:40 pm
by George W
NorincoKid wrote: ↑Sun Jan 23, 2022 1:52 pm
Got this buttoned up.
How I received it;
[IMG]
A $179 special from Centerfire. Barrel was already cut back 2" and was drilled and tapped for an aftermarket front sight base, and the receiver was drilled and tapped for scope mount.
Hacksawed it down, sanded the stock, grabbed an upper handguard & proper Persian FSB and found some random CZ/Yugo bands that were kicking around the shop.
[IMG]
Had to open up the band/bayonet lug parts to fit the barrel, since its considerably fatter there now compared to where it was supposed to be. The wood fit inside is snug but I did cut it a little shorter than I would have liked. But there was plenty of "meat" left inside.
[IMG]
First job on the new lathe was turning down the barrel to fit the front sight base. A surprising amount of metal needed to be removed. The Persian base is considerably smaller ID than any of the Yugo or Czech bases I had on hand.
[IMG]
Got that all turned down, and fitted the sight. Would up putting the whole barreled receiver in the vise and used a level on the front lug area of the receiver to get a baseline, then installed the rear sight and soldered when straight/level, ditto with the front.
[IMG]
Actually pretty happy with how this little bastardized sporter came out. A little Persian 8mm Tanker Carbine
I'm always impressed with your results. Great job.
Re: Official C&R Picture Thread
Posted: Sun Jan 23, 2022 6:39 pm
by indy1919a4
Wow now that is making a silk purse out... well... Some type of critters ear.. That is beautiful. I love the short barrel and the trench mag. Real Yin and yang look.
Only thing wrong with those trench mags is you starts to get tired as you get to the bottom of the Mag..
real nice look
Re: Official C&R Picture Thread
Posted: Wed Jan 26, 2022 12:18 pm
by NorincoKid
Re: Official C&R Picture Thread
Posted: Thu Jan 27, 2022 7:20 pm
by indy1919a4
Nice, I am not a Bayonet man, but that is nice. Any chance to see how big the handle is to like the human hand??? Oh hell even an unhuman hand would work..