Local Mechanics

Discussions of all things with motors, wheels, wings and ?????
Post Reply
FSUnoles
Posts: 37
Joined: Mon Jul 30, 2018 9:08 pm

Local Mechanics

Post by FSUnoles »

Anyone have any local mechanics in the Tri county area (preferably Broward) that could do a motor swap on a 86 MCSS? I’d like to ditch the 305 for a mild 350, nothing crazy, first quote was $6000.
Chigger
Posts: 414
Joined: Fri Aug 24, 2018 7:02 pm

Post by Chigger »

Did the 6k include the engine or was it just labor.
Might want to consider a used LS1 or LS3 instead of the small block.
User avatar
Tenzing_Norgay
Posts: 1611
Joined: Wed Jul 18, 2018 1:55 pm
Location: Your mom's house, Trebek!

Post by Tenzing_Norgay »

FSUnoles wrote: Wed Aug 05, 2020 10:08 pm Anyone have any local mechanics in the Tri county area (preferably Broward) that could do a motor swap on a 86 MCSS? I’d like to ditch the 305 for a mild 350, nothing crazy, first quote was $6000.
I can do it if you have the motor (or know what you want) and aren't in a hurry. You'd have to get the car here (Stuart).

Crate motors: https://www.summitracing.com/search/dep ... te-engines

LS Motors = $$$: https://www.jegs.com/p/Chevrolet-Perfor ... THEALw_wcB#
- I can explain it to you, but I can't understand it for you... -
FSUnoles
Posts: 37
Joined: Mon Jul 30, 2018 9:08 pm

Post by FSUnoles »

Chigger wrote: Sun Sep 05, 2021 6:58 am Did the 6k include the engine or was it just labor.
Might want to consider a used LS1 or LS3 instead of the small block.
Included the engine/labor
Tenzing_Norgay wrote: Tue Sep 07, 2021 1:55 pm [quote=FSUnoles post_id=29770 time=<a href="tel:1596679713">1596679713</a> user_id=377]
Anyone have any local mechanics in the Tri county area (preferably Broward) that could do a motor swap on a 86 MCSS? I’d like to ditch the 305 for a mild 350, nothing crazy, first quote was $6000.

I can do it if you have the motor (or know what you want) and aren't in a hurry. You'd have to get the car here (Stuart).

Crate motors: https://www.summitracing.com/search/dep ... te-engines

LS Motors = $$$: https://www.jegs.com/p/Chevrolet-Perfor ... THEALw_wcB#

I haven’t gotten the motor yet, I keep scouring for the perfect one, getting the car up there wouldn’t be an issue and there’s def no rush, it’s been sitting in my garage for 10 years and hasn’t been driven. I’d prefer to keep it carb’d just because to go to a modern LS swap it’s gonna involve so much more labor and replacements to the electronics/transmission. I think 300-450hp at the crank is more than enough for me. Just want reliability and a little pop.
User avatar
Tenzing_Norgay
Posts: 1611
Joined: Wed Jul 18, 2018 1:55 pm
Location: Your mom's house, Trebek!

Post by Tenzing_Norgay »

Jegs and Summit are always having sales/closeouts on their crate motors. Keep checking their sites.

There are bolt-on injection kits that look like/fit in the place of a carb...(Carbs are a PITA). They use one small controller box for electronics that fit on the firewall or inside the glovebox. Tuneable with a smartphone!

https://www.holley.com/products/fuel_sy ... niper_efi/
- I can explain it to you, but I can't understand it for you... -
Post Reply